Ordering details | |
---|---|
Product type description | BN 650-10Z/V |
Article number | 101187281 |
EAN Code | 4030661335735 |
eCl@ss | 27-27-01-04 |
Approval | |
Approval | - |
Global Properties | |
Permanent light | BN 650 |
Standards | - |
Compliance with the Directives (Y/N) | Yes |
suitable for elevators (Y/N) | Yes |
Mounting | central with threated flange |
Active principle | Magnetic drive |
Materials | |
- Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
- Material of the cable mantle | LiYY |
Housing construction form | cylinder smooth |
Weight | 65 |
Recommended actuator | BP 10S, 2 x BP 10S, BP 15S, BP 34S, BP 20S, BP 31S, BP 11S, 2 x BP 11S, BP 12S, 2 x BP 12S, BP 21S, 2 x BP 21S, BP 22S, 2 x BP 22S, BE 20S |
- Lift switchgear | BP 10, 2 x BP 10, BP 15, BP 34 |
Mechanical data | |
Design of electrical connection | Cable |
Cable length | 1 |
Conductors | 2 x 0,25 |
AWG-Number | 23 |
Mechanical life | 100.000.000 operations |
Electrical lifetime | 1.000.000 … 10.000.000 operations |
Switching frequency | 300/ |
Actuating planes | front side |
Switch distance | 5 … 55 BP 10S = 5 mm 2 x BP 10S = 10 mm BP 15S = 6 mm BP 34S = 20 mm BP 20S = 15 mm BP 31S = 15 mm BP 11S = 5 mm 2 x BP 11S = 15 mm BP 12S = 10 mm 2 x BP 12S = 25 mm BP 21S = 30 mm 2 x BP 21S = 20 … 55 mm BP 22S = 25 mm 2 x BP 22S = 15 … 55 mm BE 20S = 6 mm |
- notice | Actuating distance up to 55 mm depending on actuating magnet and version The specifications with regard to the switching distances apply to the actuation of the individually mounted devices without ferromagnetic influence. Any change of the distance, positive either negative, is possible due to ferromagnetic interference. When multiple actuating magnets are used, the mutual interference must be observed. |
Type of actuation | Magnet |
restistance to shock | 30 / 11 |
Resistance to vibration | 10 … 55 HZ, Amplitude 1 mm |
Bounce duration | 0,15 |
Latching (Y/N) | No |
bias magnet (Y/N) | Yes |
Tightening torque for nuts | - |
Actuating speed | 18 |
Switching point accuracy | ± 0,25 mm |
Ambient conditions | |
Ambient temperature | |
- Min. environmental temperature | −25 |
- Max. environmental temperature | +70 |
Protection class | IP67 to IEC/EN 60529 |
Electrical data | |
Design of control element | Normally open contact (NO) |
Number of shutters | 1 |
Number of openers | 0 |
Switching time - Close | 0,35 |
Switching time - Open | - |
Switch frequency | <> |
Dielectric strength | 580 |
Switching voltage | 200 |
Switching current | <td align="center" class="</tr>